A Complete Guide on Choosing a MaceratingFlo Upflush Toilet

Updated on September 19, 2023

A Complete Guide on Choosing a MaceratingFlo Upflush Toile.jpg

The importance of bathrooms in home improvement and renovation cannot be understated. The whole avenue of bathroom fixtures and plumbing has been changed with the introduction of MaceratingFlo upflush toilet. 

A MaceratingFlo upflush toilet could be the answer if you face obstacles in installing an ordinary sewage system. 

Follow these steps to learn about choosing wisely from among various plumbing options that suit your particular requirements while also keeping up with their maintenance for optimal functionality.

Understanding MaceratingFlo Upflush Toilets

With toilets in the bathroom fixture world, innovation has continually improved efficiency and convenience. A unique and versatile plumbing innovation, MaceratingFlo upflush toilet has gained popularity.

A MaceratingFlo upflush toilet, at its core, is a unique wastewater handling system. These toilets are particularly useful in basements, garages, or other places below the sewer line. Appreciating their benefits starts with understanding how these toilets work.

The most important component of a MaceratingFlo upflush toilet is its built-in macerator pump. With the help of this pump, solid waste and toilet paper are broken down into slurry which can easily be transported upward through a small pipe.

By this process, the toilet with pump built in can function properly even if installed below the main sewer line level.

MaceratingFlo upflush toilets consist of several other essential components:

  • Toilet Bowl: 

Like a normal toilet, the toilet bowl provides a seat, flushing function, and a trapway for waste removal.

  • Macerator Pump: 

The pump in question normally sits behind or within the toilet. It turns waste into a fine slurry for more efficient pipe transport.

  • Waste Pipe: 

A small pipe takes away the slurry from the toilet and merges it with the main drain or sewer line.

  • Check Valve: 

To stop backflow and guarantee efficient operation, a check valve is installed in the discharge pipe.

Benefits of MaceratingFlo Upflush Toilets:

After getting some insight into MaceratingFlo upflush toilet mechanics, we can now discuss the many advantages that make them viable options under particular circumstances.

  • Installation Flexibility: 

The most significant advantage of these toilets is their adaptability in terms of installation. By being able to pump and move waste across longer distances and in difficult spots, these tools bring a practical solution. 

Flexibility is particularly valuable in basements, additions, or other areas with plumbing layout challenges.

  • Cost Saving: 

Extensive trenching and construction work are required when installing traditional plumbing systems, making them costly. MaceratingFlo upflush toilets remove the need for extensive excavation and restructuring of plumbing lines, leading to reduced costs.

  • Space Efficiency: 

Compact and gravity-based flush free, MaceratingFlo upflush toilets are popular. As they consume very little floor space, these furnishings work well in smaller bathrooms.

  • Retrofitting:

Renovating a space and not wanting to interfere with the current plumbing setup? These toilets are ideal for such scenarios. Retrofitting into an existing structure is simple and requires minimal changes.

  • Reliable Performance: 

Designed for efficient and reliable operation, modern MaceratingFlo upflush toilets are a popular choice. Engineered for effective handling of solid waste, the macerator pump helps minimize clogs and blockages.

  • Reduced Noise: 

MaceratingFlo upflush toilets with noise reduction features provide quieter operation during flushing and waste processing.

You can discover such innovative and beneficial toilets at maceratingflo.com.

Factors to Consider Before Buying

Before you invest in a MaceratingFlo upflush toilet, it’s crucial to evaluate several key factors to ensure that it’s the right fit for your specific needs and circumstances. These considerations will help you make an informed decision and avoid potential challenges down the road.

  • Space and Location: 

Assess the available space where you plan to install the toilet. These toilets are space-efficient, but you should ensure that there’s sufficient room for both the toilet unit and the necessary plumbing connections. Additionally, consider the toilet’s location in relation to existing plumbing lines and access to electrical outlets if required.

  • Plumbing and Electrical Requirements: 

MaceratingFlo upflush toilets may need access to both plumbing and electrical connections. Ensure that your chosen location has the necessary utilities in place or that you are prepared to install them as part of the toilet setup. 

  • Waste Disposal: 

Think about where the wastewater will be discharged. MaceratingFlo upflush toilets can pump waste vertically and horizontally, but you must have a suitable location for the waste pipe to connect to your existing sewer or septic system. 

  • Upfront Costs: 

Compare the cost of purchasing and installing a MaceratingFlo toilet with traditional plumbing alternatives. While these toilets can save on excavation and construction expenses, they may have a higher upfront price.

  • Noise Level: 

These toilets can produce noise during operation, primarily from the macerator pump. If noise is a concern, look for models with noise-reduction features or consider the toilet’s location within your home to minimize disturbances.

Installation Process and Requirements

Installing a MaceratingFlo upflush toilet may seem complex, but with the right tools and a clear understanding of the process, it can be a manageable DIY project or a job for a professional plumber. Here’s a step-by-step overview of the installation process and its requirements:

  • Prepare the Space: 

Clear the installation area, ensuring there’s ample space for the toilet and access to plumbing and electrical connections if needed. Review your local building codes and obtain any necessary permits.

  • Install the Waste Pipe: 

Connect the macerator unit to the waste pipe, which will carry the slurry from the toilet to your sewer or septic system. Ensure the waste pipe is appropriately sized and properly sloped to allow for efficient drainage.

  • Electrical Connection:

If your MaceratingFlo toilet requires an electrical connection, follow the manufacturer’s instructions to safely wire the unit to a nearby electrical outlet.

  • Position the Toilet: 

Set up the toilet bowl and tank according to the manufacturer’s guidelines. Secure the toilet unit to the floor, ensuring it is level and stable.

  • Connect Water Supply: 

Connect the toilet to the water supply, following standard plumbing procedures. Test for leaks and ensure proper water flow.

  • Ventilation: 

Install a vent pipe to allow proper air circulation in the plumbing system, preventing vacuum formation and ensuring smooth waste disposal.


In your pursuit of the ideal bathroom solution, MaceratingFlo upflush toilet emerges as a versatile and practical choice. 

Consider your space, plumbing, and electrical requirements, as well as upfront costs and maintenance obligations. With careful evaluation and preparation, installation can be a manageable task.

Article by:
Kenny Trinh
While he’s not editing articles on the latest tech trends, he likes to discuss business and entrepreneur. His writing has been featured in national publications such as Forbes, RD, Yahoo Finance, HackerNoon among others.

Leave a Comment